Details

DESCRIPTION
Rapid Set® Low-P™ Cement is a low permeability, corrosion resistant, fast setting hydraulic cement based on advanced cement technology. When mixed with water and aggregates, Rapid Set® Low-P™ Cement produces concrete mixtures with unparalleled performance and ease of use. The finished Rapid Set® Low-P™ Cement concrete exhibits exceptional long-life durability in harsh freeze-thaw conditions.

APPLICATIONS
Rapid Set® Low-P™ Cement is ideal for fast-track bridge deck overlays, elevated deck repairs, pavement repairs and general concrete projects where low chloride ion permeability, corrosion resistance, and fast strength gain are desired. Rapid Set® Low-P™ Concrete is a high value alternative to latex modified concrete (LMC), microsilica, low slump, and silica fume concrete.

SURFACE PREPARATION
Concrete bonding surfaces should be clean, sound, and free from any materials that may inhibit bond such as oil, asphalt, curing compounds, acids, dirt and loose debris. Complete surface preparation in accordance with project specifications. Immediately prior to placement of Rapid Set® Low-P™ Cement concrete the repair surface should be thoroughly saturated with water for a period of no less than 1 hour. Standing water and puddles should be removed from the surface. Scrub coats or brush-in coats are not required.

Please refer to the Rapid Set® Low-P™ Cement Technical Guide for surface preparation recommendations.

FIELD TESTS
Conduct field tests panels at the jobsite using the prepared bonding surface and the Rapid Set® Low-P™ Cement concrete to determine actual field performance and suitability for your intended use.

MIX & PLACE
Low-P™ Cement concrete mixtures may be batched using volumetric mixer equipment or drum/mortar mixers. The working time is approximately 15-20 minutes. This time can be extended to one hour or more by using citric acid retarder. Roller and truss screeds can be used for small overlay placements. Self propelled screed/finishing equipment should be used for all large applications. Patching and small overlay work may require additional internal vibration. Straight edges or bull floats can be used directly behind screed/finisher equipment to assure closure of concrete surface. Surface retardants or water misting should be used to reduce evaporation. Broom or tine the concrete as soon as the surface can hold the finish. For more information, please refer to Rapid Set® Low-P™ Cement Technical Guide.

CURE
For overlays, the surface should be covered promptly after final finishing with a single, clean layer of wet burlap followed by a layer of clear polyethylene film. Patches can be water cured by maintaining a moist sheen on the surface. The curing should continue until the concrete has reached the strength desired. Depending on temperatures and specified strength, this will usually be within 1-3 hours after the final finishing. During this period apply more water, as needed, to keep the entire concrete surface continuously wet.

TEMPERATURE
Low-P™ Cement concrete may be applied in a wide range of temperatures. Contact CTS Cement for cold and hot weather placement recommendations.

YIELD & PACKAGING
Low-P™ Cement is available nationwide in 2000-lb super sacks and in bulk. When used in a typical mix design, 2000-lb will yield about 3 to 3.5 cubic yards of concrete.

MANUFACTURER
CTS Cement Manufacturing Corp.
11065 Knott Ave. Suite A, Cypress, CA 90630
Phone: 800-929-3030, Fax: 714-379-8270
Web: www.rapidset.com E-mail: info@rapidset.com

LIMITED WARRANTY
CTS Cement Manufacturing Corp. warrants its material to be of good quality, and, at its sole option, within one year of sale, will replace defective materials or refund the purchase price thereof and such replacement or refund shall be the limit of CTS's responsibility. Except for the foregoing, all warranties, express or implied including merchantability and fitness for a particular purpose are excluded. CTS shall not be liable for any consequential, incidental, or special damages arising directly or indirectly from the use of the material.

CAUTION
Rapid Set® Low-P™ Cement may contain hazardous ingredients. Please read the Rapid Set® Low-P™ Cement MSDS prior to handling this product. http://www.ctscement.com/lowp_msds.asp

Click Here to stay informed about Rapid Set® Low-P™ Cement and the advanced product uses and performance - low permeability, fast setting, corrosion and freeze-thaw resistant, hydraulic cement for bridge overlays, concrete pavement patching and repairs, and ultra-durable concrete projects.

Additional Information

Manufacturer: Rapid Set

For More Information on the Low-P Cement, [Click Here] to Link to Manufacturer Web Site